- Home
- Flow
- Myers Pump Solutions
- Myers Products
- Myers Residential Water Supply Pumps
- Myers Jet Pumps
- ²ÝÝ®ÉçÇø Myers HR Series Convertible Jet Pumps
²ÝÝ®ÉçÇø Myers HR Series Convertible Jet Pumps
Main Content Starts Here

²ÝÝ®ÉçÇø Myers HR Series Convertible Jet Pumps
HR Series Jet Pumps provide reliable service for many residential homes and farms, as well as commercial and industrial applications.
- Durable machined heavy-duty construction pump body provides long product life
- Precision-molded impellers and diffuser provide smooth, balanced performance and efficiency
- High quality proven pressure switch with adjustable on/off pressure settings, 20 PSI differential
- Heavy-duty motor with double ball bearing design and voltage selection device
- Mechanical shaft seal with ceramic face and stainless steel construction for long seal life
Specifications
Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 40 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | PRESSURE SWITCH SETTING | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Motor |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HR50S | Cast Iron | 1/2 | 11.5 GPM | 9 GPM | 80' | 70 PSI | 20 - 40 PSI | 1-1/4" NPT | 1" NPT | 1" NPT | 1" NPT (suction - over -drive) | Ìý | 230v / 115v AC, 60 Hz | Ìý | 140 F (60 C) | Dual compartment, 115v/230v volt double-ball bearing |
HR50D | Cast Iron | 1/2 | 11.5 GPM | 9 GPM | 80' | 70 PSI | 150 PSI | 20 - 40 PSI | 1-1/4" NPT | 1" NPT | 1" NPT (suction - over -drive) | Ìý | 230v / 115v AC, 60 Hz | Ìý | 140 F (60 C) | Dual compartment, 115v/230v volt double-ball bearing |
Item # | Body Construction | Horsepower | MAXIMUM CAPACITY | FLOW at 10-foot LIFT and 40 PSI | MAX LIFT | MAX SHUT-OFF PRESSURE | MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | PRESSURE SWITCH SETTING | SUCTION SIZE | DRIVE SIZE | DISCHARGE SIZE | AMP DRAW full load | Voltage | RECOMMENDED BREAKER | MAXIMUM WATER TEMPERATURE | Motor |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HR50S | Cast Iron | 1/2 | 11.5 GPM | 9 GPM | 80' | 70 PSI | 20 - 40 PSI | 1-1/4" NPT | 1" NPT | 1" NPT | 1" NPT (suction - over -drive) | Ìý | 230v / 115v AC, 60 Hz | Ìý | 140 F (60 C) | Dual compartment, 115v/230v volt double-ball bearing |
HR50D | Cast Iron | 1/2 | 11.5 GPM | 9 GPM | 80' | 70 PSI | 150 PSI | 20 - 40 PSI | 1-1/4" NPT | 1" NPT | 1" NPT (suction - over -drive) | Ìý | 230v / 115v AC, 60 Hz | Ìý | 140 F (60 C) | Dual compartment, 115v/230v volt double-ball bearing |